Disclosure: StitchKit is made by MavenWright, the publisher of this page. Prices and system requirements for other products were taken from their official websites on 17 November 2026 and are linked below. They change, so check before you buy.
Hatch Embroidery by Wilcom is one of the most popular digitizing programs for home and small-business embroiderers, and for good reason: it is capable, well documented and backed by a big learning library. Its one real limit is the operating system. Hatch is a Windows program, and if you sew from a Mac, that single fact shapes everything else.
What running Hatch on a Mac actually takes
Hatch's own help center is clear about it (Will Hatch Embroidery run on a Mac?):
- Hatch does not run natively on macOS. On an Apple-silicon Mac (M1 to M5) it runs inside a Windows virtual machine using Parallels Desktop.
- Apple-silicon Macs must use the ARM edition of Windows 11, and Hatch is installed inside that virtual machine, not in macOS.
- Hatch lists 32 GB of physical memory as the minimum, and recommends Parallels Desktop Pro Edition for larger designs, because the Standard edition caps the virtual machine at 8 GB.
- The free Hatch trial isn't supported in that setup, so you buy first and rely on the 30-day money-back guarantee.
- Hatch support covers Hatch itself. Problems with Parallels, Windows or the Mac go to those companies.
None of that makes Hatch a bad program. It does mean a Mac owner pays for, and maintains, a second operating system just to digitize. If your Mac has 8 or 16 GB of memory, it doesn't meet the minimum at all.
The native alternatives for Mac
There are four realistic routes that run on macOS without Windows:
- StitchKit (ours). A native app for Apple-silicon and Intel Macs that also runs on iPad, Android and Windows. It opens and saves DST, PES, EXP, JEF, VP3, XXX, PEC, VIP and HUS, has auto-digitizing (Magic Wand) and full manual control, and has a free plan.
- Embrilliance. Runs natively on Mac and Windows, and is sold as one-time purchases. Essentials covers editing and lettering. StitchArtist adds manual digitizing in three levels, but Embrilliance itself says StitchArtist is not an auto-digitizing program.
- Ink/Stitch. Free and open-source, it runs inside Inkscape on macOS. Capable manual digitizing, with a steeper, more technical learning curve.
- StitchBuddy. A Mac editor for viewing, resizing and recolouring existing designs. Handy, but not a digitizer.
Hatch vs StitchKit at a glance
| Hatch Embroidery 4 | StitchKit | |
|---|---|---|
| Runs natively on macOS | No (Windows only) | Yes, Apple silicon and Intel |
| Needs Parallels + Windows 11 ARM on a Mac | Yes | No |
| Memory Hatch lists for Mac use | 32 GB minimum | Normal Mac app, no virtual machine |
| iPad and Android | No | Yes |
| Free way to try it on a Mac | Trial not supported under Parallels | Free plan, no card |
| Auto-digitizing | Composer and Digitizer levels | Pro plan |
| Manual digitizing (satin, fill, running, underlay, pull compensation) | Yes, mature | Yes (full tool set in Pro) |
| Opens Hatch .EMB working files | Yes | No (open the exported DST/PES/etc.) |
| Machine formats | Many | DST, PES, EXP, JEF, VP3, XXX, PEC, VIP, HUS |
| Price | Composer US$699, Digitizer US$1,199 one-time, or FlexPay monthly | Free plan; Starter $49, Pro $79, Ultimate $149 a month (or yearly) |
| Learning resources | Large video library and community | Built-in guides; younger product |
Sources: Hatch pricing, Hatch on a Mac, StitchKit pricing. Checked 17 November 2026.
The honest cost picture
A subscription isn't automatically cheaper than a one-time licence, so here is the plain arithmetic.
- On Windows, Hatch Composer (US$699) or Digitizer (US$1,199) is a one-time purchase. If you will use it for several years, that can cost less than any subscription, StitchKit's included. StitchKit Pro is $711 a year.
- On a Mac, the Hatch price is only the start. Add a Parallels Desktop licence (Pro Edition for larger designs), a Windows 11 licence, and a Mac with at least 32 GB of memory. If your current Mac has less, the cheapest route to Hatch may be a new computer.
- StitchKit's free plan opens and saves the main machine formats with basic editing and no card, so you can test real files on your own Mac before spending anything. Auto-digitizing starts at Pro.
Moving your work from Hatch
- Export from Hatch to the machine format you sew with (DST, PES, JEF, VP3, EXP). Keep your .EMB files too, in case you ever go back.
- Open the exported files in StitchKit. You can resize with stitch recalculation, recolour, resequence, check density on the heatmap and save to another format.
- Re-digitize the designs you change often from the original artwork with Magic Wand, then fine-tune stitch angles, underlay and pull compensation.
- Keep your lettering workflow. StitchKit's Lettering Studio has outline, tatami, satin and motif fills and imports BX fonts.
When Hatch is still the better choice
- You work on a Windows PC and want to pay once.
- You depend on .EMB files or share them with other Wilcom users.
- You value Hatch's courses, videos and community, which are some of the best in home embroidery.
- You already own Hatch and it does what you need. Switching costs time.
When StitchKit is the better fit
- You're on a Mac and don't want to run Windows, buy Parallels or upgrade to 32 GB.
- You want to work on an iPad or Android tablet as well as a computer.
- You want auto-digitizing plus real manual control in one app.
- You'd like to try it on your own designs for free before paying.
Start with the free plan, open a few of your exported Hatch designs, and decide with your own files in front of you. For a broader look at Mac options, see our guide to embroidery software for Mac. If you're weighing Embrilliance instead, read the Embrilliance alternative comparison.
Hatch, Hatch Embroidery and Wilcom are trademarks of their owners. Embrilliance, Ink/Stitch and StitchBuddy belong to their respective owners. MavenWright is not affiliated with them.